Rose Electronics UltraVista LC II
Product Description
ltraVista LC is a video wall controller that provides an inexpensive means to build or add on to a high quality video wall. UltraVista LC connects directly to a computer with a single DVI cable with a single-link DVI or HDMI input, and instantly displays the video source on a large video wall. Video can be displayed at high resolutions of up to 1920 x 1200. It will automatically detect the correct settings for the video, eliminating extra setup and the need for adjustments. The video source is split evenly over the display array with no image scaling. A remote control or the connected computer is used to control the unit.
UltraVista LC can be automatically configured for three different output modes, including video wall mode, clone mode, and replication mode. These modes are automatically configured based on the input resolution from the video source. In video wall mode, the image is accurately split over the display array. In clone mode, the same image is displayed on all monitors. In the replication mode, the same image is shown on each row of monitors.
UltraVista LC is available in 3 models:
- 2x2 - 1 DVI input / 4 single-link DVI outputs
- 2x4 – 1 HDMI input / 4 single-link HDMI outputs
- 3x3 - 1 DVI input / 9 single-link DVI outputs
UltraVista LC can be expanded to make a 4x4 or 9x9 video array.
Key Features
- Supports Dual link DVI video input Single-link DVI video outputs
- Models: 2x2 - 1 dual-link DVI input / 4 single-link DVI outputs
- Models: 3x3 - 1 dual-link input / 9 single-link DVI outputs
- Models: 1x4 1 dual-link DVI input / 4 single-link DVI outputs (monitors orientated horizontally)
- Video input resolutions up to 3840 x 2400
- Output resolutions up to 1920 x 1200
- Depending on input resolution, the display mode is automatically set for:
- Clone mode (Same image on all monitors)
- Split mode (Same image on each row)
- Video wall mode (Image split over all displays)
- Easy adjustments for bezel compensation
- Expand a 2x2 model easily to a 4x4 display,
- Expand a 3x3 model to a 6x6 or a 9x9 display array.
- Configure the 1x4 model with 4 monitors arranged horizontally
- Adjustments and control can be performed using a remote control or commands from a connected computer using the OSD functions
- Compatible with most monitor that supports DVI input. Displays can be LCD, HD Plasma, DLP, Projectors, or others.
Product Code
Product Name
Add to Basket