G&D DP1.2-Vision-IP - DisplayPort signal transmission over standard IP-based networks, CAT, layer 3
The DP1.2-Vision-IP-System consists of a computer module (transmitter) and a user module (receiver). DisplayPort image data is processed according to DP1.2. Thus, the maximum possible image resolution of a pixel rate will be between 25MPixel/s up to 600MPixel/s.
The system works as a KVM Extender over IP or as a CPU interface Module & User Interface Module when used in conjunction with the ControlCenter-IP to form a KVM Matrix system over IP with up to 500 end points
The transmission is compressed, pixel perfect, with low latency and ideal hand-eye coordination on LAN infrastructures over standard IP networks on layer 3 even beyond optional network components.
PS/2, USB, bi-directional audio & RS232 serial support Local & Remote access, optional redundant power
Resolutions supported 1920x1200/60Hz, 2560x1600/60Hz, 2048x2048/60Hz (2Kx2K), 4096x2160/30Hz (4K@30Hz), 3840x2160/30Hz (Ultra-HD/30Hz), 4096x2160@60Hz
With the Monitoring function, you can auto-output device status messages to Syslog servers or via SNMP. The web interface lets you monitor the device manually.
The Monitoring function of the DP1.2-Vision-IP queries the following values:
- Proactive monitoring of device status
- Event reporting function (Syslog or SNMP traps)
- Status power supply unit (on/off)
- Status temperature threshold device (in/over limit)
- Status connection cables (ok/nok)
- Status computer (on/off)
- Status image signal graphics card computer (available/not available)
- Status network
- Status interfaces (CPU and CON modules)
- Freeze status (all channels)
- Type of display (local and remote)